INFINITY®
X TRANSMITTER SERIES
SMART
TRANSMITTER FOR DC VOLTS, CURRENT, TEMPERATURE AND STRAIN WITH SENSOR
EXCITATION
Standard features
include 4-open collector outputs, wide selection of input ranges, peak
and valley detection, smart filtering, large digital offset capabilities,
on-board sensor excitation, and field installable output, control and
communication options.
MOST
POPULAR MODELS
|
|
$740.00
|
|
|
$605.00
|
|
|
$840.00
|
|
HPXUR:
Hand-held programmer/remote red display
|
$150.00
|
INPUT
TYPE
TEMPERATURE TRANSMITTER
accepts J, K, T, E,
R, S, B, N and DIN J thermocouples plus 10 ohm copper and all 100 ohm
platinum 2-, 3- and 4-wire RTDs. Selectable readings in Centigrade, Fahrenheit
or Kelvin Sensor break detection. Factory default setup is type ôKö T/C
in ░F.
|
|
TEMPERATURE
TRANSMITTER |
$495.00
|
STRAIN TRANSMITTER
for strain gage, pressure transducer, load cell and virtually any bridge
input. On-board transducer excitation. Easy scaling to engineering units.
Factory default setup is 0-100 mV input with 10 V dc sensor excitation
scaled to display 0 to 100000.
|
|
STRAIN
TRANSMITTER |
$445.00
|
PROCESS TRANSMITTER
accepts a wide selection
of DC current and DC voltage inputs as well as potentiometer and ratiometric
inputs. Large digital offset capability allows for easy scaling to virtually
any engineering unit. On-board excitation to power transducers or current
loops. Factory default is 4-20 mA input and 24 V dc sensor excitation
to display 0 to 100000.
|
|
PROCESS
TRANSMITTER |
$445.00
|
UNIVERSAL TRANSMITTER
all the capabilities
of the Temperature, Process and Strain versions available in one instrument.
Factory default setup is 0-100 mVdc input with 10 V dc sensor excitation
to display 0 to 100000.
|
|
UNIVERSAL
TRANSMITTER |
$545.00
|
SCALE TRANSMITTER for load cell, strain gage, pressure transducer
inputs. Handbook 44 certified for Class III, IIIL, IV. Standard features
include digital tare, class selection, scale division selection, easy
scaling to transmit in any engineering units, 10 or 24 Vdc sensor excitation.
Factory default is 0-100 mV input with 10 Vdc sensor excitation.
|
|
SCALE
TRANSMITTER |
$495.00
|
POWER
AND LED COLOR
|
0
|
Designates
115 Vac power |
N/C
|
|
1
|
Designates
230 Vac power |
N/C
|
|
2
|
Designates
10-30 VDc power* |
$110.00
|
* dc power is not
available with REL4 option below.
BCD
AND CONTROL OUTPUT(S)
|
0
|
Four
optically isolated open-collector outputs |
N/C
|
|
1
|
Isolated
parallel BCD output (BCD1) |
$110.00
|
|
2
|
Isolated
dual 7 amp relays (REL1) |
$75.00
|
|
3
|
Isolated
dual 7 amp and dual 1 amp relays (REL4) |
$175.00
|
ANALOG
OUTPUT
|
0
|
No
analog output |
N/C
|
|
1
|
Isolated
analog output (0-20 mA, 4-20 mA, 0-5 V 1-5 V, 0-10 V (AN02) |
$110.00
|
SERIAL
OUTPUTS
|
0
|
No
serial output |
N/C
|
|
1
|
Isolated
RS-232 serial output* (RS20) |
$110.00
|
|
2
|
Isolated
RS-485 serial addressable output* (RS40) |
$110.00
|
*Includes 6' of
interconnecting cable with telephone plug connectors. See serial connector
accessories below for conversion to ôDö type connectors.
RANGE
PROCESS OR STRAIN
|
DC1
|
0-100
mV
|
N/C
|
|
DC7
|
▒50
mV
|
N/C
|
|
DC2
|
0-1
V
|
N/C
|
|
DC8
|
▒500
mV
|
N/C
|
|
DC3
|
0-5 V
|
N/C
|
|
DC9
|
▒5
V
|
N/C
|
|
DC4
|
1-5
V
|
N/C
|
|
DC10
|
▒50
V
|
N/C
|
|
DC5
|
0-10
V
|
N/C
|
|
C1
|
0-20
mA
|
N/C
|
|
DC6
|
0-100 V
|
N/C
|
|
C2
|
4-20
mA
|
N/C
|
TEMPERATURE
|
TC
|
J,
K, E, T, B, S, N or DIN J in degrees C, F or K |
N/C
|
|
RTD1(**)
|
10
ohm copper** |
N/C
|
|
RTD2(**)
|
100
ohm platinum with 0.00385 alpha** |
N/C
|
|
RTD3(**)
|
100
ohm platinum with 0.00392 alpha** |
N/C
|
** Enter C
for Centigrade, F for Fahrenheit, or K for Kelvin.
NOTE: All of the above ranges are available on the ôINFXUö.
ADD-ON OPTIONS
|
FS
|
Special
calibration configuration |
$25.00
|
|
HPXUR
|
Hand-held
programmer/remote red display |
$150.00
|
|
HPXUG
|
Hand-held
programmer/remote green display |
$150.00
|
|
HPXWR
|
Hand-held
programmer/remote red display for INFXW |
$150.00
|
|
HPXWG
|
Hand-held
programmer/remote green display for INFXW |
$150.00
|
|
HPU
|
Bail-mount |
$50.00
|
ACCESSORIES
|
9SC2
|
9-pin
serial connector with RJ-11 jack for RS-232 |
$30.00
|
|
9SC4
|
9-pin
serial connector with RJ-12 jack for RS-485 |
$30.00
|
|
25SC2
|
25-pin
serial connector with RJ-11 jack for RS-232 |
$30.00
|
|
25SC4
|
25-pin
serial connector with RJ-12 jack for RS-485 |
$30.00
|
|
SP1
|
Split
connector for RS-485 network |
$15.00
|
|
SB03
|
Setup
and configuration, & communications diskettes |
$10.00
|
|
